ZR2 Chevy S10 and GMC Sonoma Fender Flare Fitment

16
12733

Spring 2020 Update:

We now have fender flares that are direct fit for the true ZR2 S10 bedside. See the options at the bottom of this post.

Original Post:

As shown on the product page, there is some confusion about mounting our ZR2 fender flares on the Chevy S10 and GMC Sonoma pick up trucks. It turns out that many of these trucks have ZR2 front fenders but non-ZR2 beds. Obviously some of these pick ups were originally non-ZR2 models and people swapped the front fenders for ZR2 fenders (such as the one shown on the left below). In other situations, people have true ZR2 pick ups but have replacement non-ZR2 beds.

, ZR2 Chevy S10 and GMC Sonoma Fender Flare Fitment
Standard non-ZR2 Bedside
, ZR2 Chevy S10 and GMC Sonoma Fender Flare Fitment
A True ZR2 Bedside: Lip rolled outwards and holes in face. (Click to enlarge)

 
, ZR2 Chevy S10 and GMC Sonoma Fender Flare Fitment
ZR2 Front Fenders and standard non-ZR2 bed. Our fender flares fit perfectly!

 

 

 

 

 

In any case, our front ZR2 fender flares will be a direct fit on any ZR2 pick up or Blazer. And if you have a standard non-ZR2 bed, then our rear flares will also be a direct fit. The truck shown to the right has ZR2 front fenders and a standard non-ZR2 bed. Our fender flares seen in our online store here are a direct fit with this mixed truck set up.

Actual ZR2 Bedsides and How To Adapt:

(2020 Update: No need to adapt anymore. We now offer fender flares that are a direct fit on the ZR2 bedside)

If you have a true ZR2 bed, then you will have to create some drop down brackets as shown below. A true ZR2 bed will have holes in the painted face from mounting the original ZR2 flares. It will also have a lip around the edge of the wheel well that is rolled outwards. Our rear ZR2 fender flares are a direct fit on the ZR2 Blazer. These pick ups have a higher cut larger rear wheel well opening though.

That being said, you can make some simple drop down brackets to mount these rear fender flares on the ZR2 bed. Compared to the Blazer, the wheel well is cut about 1 inch higher at the top centre. You will need to create a few small brackets to mount the flares approximately 1 inch lower than the lip of the wheel well. The small brackets will actually be quite similar to the factory ones at the lower sides of the wheel well. (See factory brackets in photo of a ZR2 bedside). Again, the front fender flares will be a direct fit. It is just the rear flares that require this extra work.
, ZR2 Chevy S10 and GMC Sonoma Fender Flare Fitment
1 inch drop down bracket to accommodate 4 inch flare height
, ZR2 Chevy S10 and GMC Sonoma Fender Flare Fitment
Backside of flare, about 4 inch height
 

 

 

 

3 Options for S10 Pick Up Fender Flares:

 
 
 

16 Comments

  1. I have a 2000 ZR2 Blazer and I need a set of the fender flares. Are they available for sale at this point? Website says out of stock. Had a blow out on Saturday and one of the fender flares was ripped off the front. Have another one on the car now that is cracked. Looking to replace all of them. Please let me know availability and pricing information.
    Thanks a million!!!

    • Hello Jasen,

      We are expecting to get more ZR2 Chev Blazer fender flares in stock in about a week. Please be sure to enter your email address just below the price on the product page to receive an email notification as soon as they are restocked.

      Sorry to hear about your luck with the blow out and further damage!

      • Please let me know when you restock too? I’d like to order a set too for my 2000 Chevy S10 ZR2.

      • We have actually just restocked these fender flares for the ZR2 S10 but they are nearly sold out already! If you don’t manage to get them in time, please enter your email address just below the price on the product page so you will receive an email notification as soon as they are restocked next time.

    • Hi Craig,

      Does your ZR2 S10 still have the original bed/box? Or has it been swapped for a standard one like so many others?

      If you do have a ZR2 bed, we will be making the rears for it within the next month so please stay tuned!

      If you have a standard (non-ZR2) bed, than the ZR2 Blazer flares will be exactly what you need.

  2. Hi. I have 2003 chevy s10 ls cab extended non zr2. I need set rear fender flares, I can’t find. Do you can help me

    • The rear pair of fender flares for the non-ZR2 Chevrolet S10 will be $150. I have just emailed you with more details.

    • Hello Scott,

      We don’t sell single flares but we can offer you a pair of 2 rear flares for $150 plus shipping. Please use the contact us form to request an invoice for this rear pair if you are ready to order.

Leave a Reply to Mr. Jungle Cancel reply

Please enter your comment!
Please enter your name here

Leave the field below empty!

I accept the Privacy Policy